Glue layer between DVB and conditional access systems. More...

#include "techtype.h"

Enumerations
enum	E_CA_DECODE_STATUS { CA_DECODE_STATUS_STARTING, CA_DECODE_STATUS_STARTED, CA_DECODE_STATUS_STOPPED }

Functions
BOOLEAN	STB_CAInitialise (void)
	Called once on system startup to allow initialisation of the CA systems. More...

BOOLEAN	STB_CAAcquireDescrambler (U8BIT demux, U16BIT serv_id, U16BIT ca_ids, U16BIT num_ca_ids, U32BIT handle)
	This function is used by the resource manager to acquire a CA descrambler that's able to descramble a service that uses one of the CA systems defined by the array of CA system IDs (ca_ids). If a descrambler is available then a handle should be returned in 'handle' which will be used in all future calls related to this descrambler. If the CA software needs to set the demux descrambling keys, or create any filters to monitor SI data, the given demux handle should be used. More...

BOOLEAN	STB_CAReleaseDescrambler (U32BIT handle)
	Will be called when a CA descrambler is no longer required. More...

void	STB_CADescrambleServiceStart (U32BIT handle)
	This function will be called when decoding of a service is about to start and there's an associated descrambler. More...

void	STB_CADescrambleServiceStop (U32BIT handle)
	This function will be called when decoding of a service is stopped. More...

void	STB_CAReportPMT (U32BIT handle, U8BIT *pmt_data, U16BIT data_len)
	When there's an update to the PMT for a service, the updated PMT will be reported to the CA system using this function. More...

void	STB_CAReportCAT (U32BIT handle, U8BIT *cat_data, U16BIT data_len)
	When there's an update to the CAT for a service, the updated CAT will be reported to the CA system using this function. The data is provided a section at a time, rather than as a complete table. More...

void	STB_CAReportBAT (U32BIT handle, U8BIT *bat_data, U16BIT data_len)
	When there's an update to the BAT, the updated BAT will be reported to the CA system using this function. The data is provided a section at a time, rather than as a complete table. More...

void	STB_CAReportNIT (U32BIT handle, U8BIT *nit_data, U16BIT data_len)
	When there's an update to the NIT, the updated NIT will be reported to the CA system using this function. The data is provided a section at a time, rather than as a complete table. More...

void	STB_CADecodeVideoStatus (U32BIT handle, E_CA_DECODE_STATUS decode_status)
	Notifies the CA system of a change in the video decoding state. More...

void	STB_CADecodeAudioStatus (U32BIT handle, E_CA_DECODE_STATUS decode_status)
	Notifies the CA system of a change in the audio decoding state. More...

void	STB_CADecodeADStatus (U32BIT handle, E_CA_DECODE_STATUS decode_status)
	Notifies the CA system of a change in the AD decoding state. More...

void	STB_CANotifyRunningStatus (U32BIT handle, U8BIT status)
	This function will be called when there's a change to the running status of a service being descrambled as indicated by the running_status field in the SDT. More...

BOOLEAN	STB_CADescramblerRequiredForPlayback (U16BIT *ca_ids, U16BIT num_ca_ids)
	This function works out whether a CA descrambler is required to playback a recording with one of the given CA system IDs. More...

BOOLEAN	STB_CADescramblerRequiredForRecording (U16BIT *ca_ids, U16BIT num_ca_ids)
	This function works out whether a CA descrambler is required to record a service with one of the given CA system IDs. More...

U16BIT	STB_CAGetRecordingPids (U8BIT pmt_data, U16BIT *pid_array)
	This function is called to get an array of PIDs that need to be recorded for the CA system required for the given PMT. The array must be allocated by this function, which also returns the number of items in the array. More...

void	STB_CAReleaseRecordingPids (U16BIT *pid_array, U16BIT num_pids)
	Called to free the array of PIDs allocated by STB_CAGetRecordingPids. More...

void	STB_CANotifyRecordingStatus (U32BIT handle, BOOLEAN status)
	This function is called when a recording starts and when it stops. More...

Detailed Description

Glue layer between DVB and conditional access systems.

Date: 10/09/2013

Author: Steve Ford

Function Documentation

BOOLEAN STB_CAAcquireDescrambler	(	U8BIT	demux,
		U16BIT	serv_id,
		U16BIT *	ca_ids,
		U16BIT	num_ca_ids,
		U32BIT *	handle
	)

This function is used by the resource manager to acquire a CA descrambler that's able to descramble a service that uses one of the CA systems defined by the array of CA system IDs (ca_ids). If a descrambler is available then a handle should be returned in 'handle' which will be used in all future calls related to this descrambler. If the CA software needs to set the demux descrambling keys, or create any filters to monitor SI data, the given demux handle should be used.

Parameters

demux	- demux to be used if a descrambler is acquired
serv_id	- ID of the service the descrambler is being acquired for
ca_ids	- array of CA system IDs for the service
num_ca_ids	- number of CA system IDs in the array
handle	- pointer to return a handle to identify the acquired CA descrambler

Returns: TRUE if a descrambler is acquired, FALSE otherwise

void STB_CADecodeADStatus	(	U32BIT	handle,
		E_CA_DECODE_STATUS	decode_status
	)

Notifies the CA system of a change in the AD decoding state.

Parameters

handle	- CA descrambler handle
decode_status	- decoding status

void STB_CADecodeAudioStatus	(	U32BIT	handle,
		E_CA_DECODE_STATUS	decode_status
	)

Notifies the CA system of a change in the audio decoding state.

Parameters

handle	- CA descrambler handle
decode_status	- decoding status

void STB_CADecodeVideoStatus	(	U32BIT	handle,
		E_CA_DECODE_STATUS	decode_status
	)

Notifies the CA system of a change in the video decoding state.

Parameters

handle	- CA descrambler handle
decode_status	- decoding status

BOOLEAN STB_CADescramblerRequiredForPlayback	(	U16BIT *	ca_ids,
		U16BIT	num_ca_ids
	)

This function works out whether a CA descrambler is required to playback a recording with one of the given CA system IDs.

Parameters

ca_ids	- array of CA system IDs
num_ca_ids	- number of CA system IDs in the array

Returns: TRUE if a CA descrambler is required, FALSE otherwise

This function works out whether a CA descrambler is required to playback a recording with one of the given CA system IDs.

Parameters

ca_ids	- array of CA system IDs
num_ca_ids	- number of CA system IDs in the array

Returns: TRUE if a CA descrambler is required, FALSE otherwise

BOOLEAN STB_CADescramblerRequiredForRecording	(	U16BIT *	ca_ids,
		U16BIT	num_ca_ids
	)

This function works out whether a CA descrambler is required to record a service with one of the given CA system IDs.

Parameters

ca_ids	- array of CA system IDs
num_ca_ids	- number of CA system IDs in the array

Returns: TRUE if a CA descrambler is required, FALSE otherwise

This function works out whether a CA descrambler is required to record a service with one of the given CA system IDs.

Parameters

ca_ids	- array of CA system IDs
num_ca_ids	- number of CA system IDs in the array

Returns: TRUE if a CA descrambler is required, FALSE otherwise

void STB_CADescrambleServiceStart ( U32BIT handle )

This function will be called when decoding of a service is about to start and there's an associated descrambler.

Parameters

handle - CA descrambler handle

void STB_CADescrambleServiceStop ( U32BIT handle )

This function will be called when decoding of a service is stopped.

Parameters

handle - CA descrambler handle

U16BIT STB_CAGetRecordingPids	(	U8BIT *	pmt_data,
		U16BIT **	pid_array
	)

This function is called to get an array of PIDs that need to be recorded for the CA system required for the given PMT. The array must be allocated by this function, which also returns the number of items in the array.

Parameters

pmt_data	- raw PMT section data
pid_array	- pointer to an array allocated by this function on return, containing the PIDs to be recorded

Returns: the number of PIDs in the returned array

BOOLEAN STB_CAInitialise ( void )

Called once on system startup to allow initialisation of the CA systems.

Returns: TRUE if initialisation is successful, FALSE otherwise

void STB_CANotifyRecordingStatus	(	U32BIT	handle,
		BOOLEAN	status
	)

This function is called when a recording starts and when it stops.

Parameters

handle	- CA descrambler handle
status	- TRUE when a recording starts, FALSE when it stops

void STB_CANotifyRunningStatus	(	U32BIT	handle,
		U8BIT	status
	)

This function will be called when there's a change to the running status of a service being descrambled as indicated by the running_status field in the SDT.

Parameters

handle	- CA descrambler handle
status	- running status as defined in the SDT

BOOLEAN STB_CAReleaseDescrambler ( U32BIT handle )

Will be called when a CA descrambler is no longer required.

Parameters

handle - CA descrambler handle being released

Returns: TRUE if the descrambler is released, FALSE otherwise

void STB_CAReleaseRecordingPids	(	U16BIT *	pid_array,
		U16BIT	num_pids
	)

Called to free the array of PIDs allocated by STB_CAGetRecordingPids.

Parameters

pid_array	- array of PIDs to be freed
num_pids	- number of PIDs in the array

void STB_CAReportBAT	(	U32BIT	handle,
		U8BIT *	bat_data,
		U16BIT	data_len
	)

When there's an update to the BAT, the updated BAT will be reported to the CA system using this function. The data is provided a section at a time, rather than as a complete table.

Parameters

handle	- CA descrambler handle
bat_data	- raw BAT section data
data_len	- number of bytes in the BAT section

void STB_CAReportCAT	(	U32BIT	handle,
		U8BIT *	cat_data,
		U16BIT	data_len
	)

When there's an update to the CAT for a service, the updated CAT will be reported to the CA system using this function. The data is provided a section at a time, rather than as a complete table.

Parameters

handle	- CA descrambler handle
cat_data	- raw CAT section data
data_len	- number of bytes in the CAT section

void STB_CAReportNIT	(	U32BIT	handle,
		U8BIT *	nit_data,
		U16BIT	data_len
	)

When there's an update to the NIT, the updated NIT will be reported to the CA system using this function. The data is provided a section at a time, rather than as a complete table.

Parameters

handle	- CA descrambler handle
nit_data	- raw NIT section data
data_len	- number of bytes in the NIT section

void STB_CAReportPMT	(	U32BIT	handle,
		U8BIT *	pmt_data,
		U16BIT	data_len
	)

When there's an update to the PMT for a service, the updated PMT will be reported to the CA system using this function.

Parameters

handle	- CA descrambler handle
pmt_data	- raw PMT section data
data_len	- number of bytes in the PMT

Enumerations

Functions

Detailed Description

Function Documentation